Category Archives: Events


MD&M East is the east coast’s biggest Medtech event, located in New York, NY. In its 34th year, the event featured industry trends including 3D printing, smart manufacturing, and robotics for thousands of engineers, executives, and various other attendees. Alongside MD&M East there were five other advanced design and manufacturing trade events, resulting in a broad range of professionals in one area.

MIM2016 cover

During an eventful week at the MIM2016 conference, members of the Liquidmetal team presented on Amorphous Metal Technology and R&D Efforts. At the only international powder and metal injection molding event of the year, Paul Hauck, EVP of Sales and Marketing, and Joe Stevick, Senior Physicist, introduced a new twist on traditional injection molding.

January 2016 turned out to be a gainful month for Liquidmetal Technologies and its partner, ENGEL. Over 200 guests were hosted at ENGEL’s state-of-the-art technology forum in Stuttgart, Germany, for an event focused on educating participants on the science and technology behind the Liquidmetal manufacturing process. As a new process that breaks traditional expectations for metal manufacturing, Liquidmetal technology draws plenty of attention, but requires a new level of understanding for it to be fully leveraged.

_PDH0127 sm

Daniel_Craig_is_seen_at_the_OMEGA_Factory_Visit_in_Switzerland_2 sm The OMEGA Seamaster 300 “SPECTRE” Limited Edition will be worn by Daniel Craig in his upcoming role as James Bond in the 24th instalment of the film series, SPECTRE.

“The watch features a bi-directional, rotating diving bezel, made from black, polished ceramic, combined with a LiquidMetal® 12 hour scale, so that time can be kept with any country in the world.”

5D3_2445 sm

Just two days following the grand opening of the Liquidmetal Manufacturing Center of Excellence, all investors were invited to attend the Liquidmetal Technologies Annual Shareholder meeting and experience the newly upgraded facility first hand. The event kicked off with the Annual shareholder meeting, followed by presentations by Dennis Ogawa, Vice President Marketing, and Paul Hauck, Vice President World Wide Sales and Support. Following the presentations by Dennis and Paul, Tom Steipp, President and CEO, hosted a question and answer session with all investors present and invited guests.

IMG_2744 sm

October 13, 2014, Rancho Santa Margarita, California – Liquidmetal Technologies hosted fifteen North American Application Specialists, also known as manufacturer’s sales representatives (MSRs), for sales training. The daylong event covered every aspect of the company’s technology and involved the entire team behind Liquidmetal Technologies.

IMG_2581 sm

October 14, 2014, Rancho Santa Margarita, California – Liquidmetal Technologies held its first ever open house at the recently opened Liquidmetal Manufacturing Center of Excellence. Prospective customers from throughout the country flew in to experience the new facility, see the latest advancements in technology, and meet the Liquidmetal team in person.

Liquidmetal Technologies Broadens Research Community 2

Every day Liquidmetal® Technologies remains focused on the cutting edge of research and development of amorphous metal alloys (aka metallic glasses). One of the most important aspects of this effort is collaboration with outside researchers and universities. Recently, Liquidmetal scientists began a strong relationship with Vitrified Metals: Technologies and Applications in Devices and Chemistry by presenting at their 1st annual meeting.

PIM cover

Powder Injection Moulding International is the leading publication specifically for the metal, ceramic, and carbide injection molding industries. The publication is based in Shrewsbury, UK and is in its 8th year covering the industries. In PIM International’s September publication Liquidmetal® Technologies was featured in an article authored by Liquidmetal Vice President of World Wide Sales and Support, Paul Hauck. Paul utilizes his more than 27 years of experience in the MIM industry to share insights about MIM and Liquidmetal products. He provides a brief history of Liquidmetal Technology Inc. and compares and contrasts the two processes.

“The invitation to write the article for PIM International was a great opportunity to showcase and contrast the Liquidmetal process with Metal Injection Molding (MIM).  Both technologies bring special processing capabilities for complex metal parts.  The uniqueness of Liquidmetal’s single step process is one of its most notable differences with MIM,” said Paul Hauck, Vice President of Sales and Support, for Liquidmetal Technologies.

To read the article you can download a free copy at


Liquidmetal Technologies was a featured exhibitor and presentor last week (Apr. 2-4) at the annual Advanced Aerospace Materials and Processes conference (AeroMat), which is considered the “premier conference for applied materials and processing for the global aerospace industry.”